PM Alert

TIC™ (Temperature Indicating Captor) is a patent pending, Low Cost Industrial Bearing Monitor and Hot Bearing Indicator.

TIC™ is an asset management reliability tool, providing predictive, proactive and preventative maintenance benefits in one small package.

Place TIC™ on your critical bearings to prepare for retirement of skilled workforce.

Can be equipped with external contact output to PLC, DCS system, or two wireless schemes via radio or cellular technologies.

Installs in less than 5 minutes.

Understood in any language - Min. training - blue OK, red - contact maintenance.

Station Operators who don't do "rounds" now can give you an early alert.

TIC sensor is inserted inside the bearing housing to monitor bearing temperature. Since the outside temperature of the housing can be 10 to 20 degrees higher, TIC offers superior results over IR guns and IR cameras.

Use TIC to provide an early indication to prolong lubrication to prevent damage. Prevent the lubrication breakdown to prevent equipment breakdown.

Blue flash
1 red flash
2 red flashes
3 red flashes

= Bearings are cool
= 1st limit
= 10 > limit
= 20 > limit

Models:
TIC-120 set at 120^oF $190
TIC-150 set at 150^oF $190
TIC-180 set at 180^oF $190
TIC-210 set at 210^oF $190
Options:
External Contact Output -- D --$70
Magnetic Mount -- M -- $15

• Simple & Cost Effective!
• Lengthen Lubrication lifespan -> Increases bearing Life!
• Reduce Fire Hazard!
• Employees learn when applying grease (too much will cause bearings to heat up - TIC will begin to flash red)!

No Training Required
Ease of Use | No Wiring

Battery Operated with no wiring. Before bearings fail, stick on a TIC and let your operators PM Alert you!

Motor monitored by TIC

will flash red from:

poor ventilation,
hot windings,
poor lubicated bearings,
miss-alignment
excessive side load.

Technical information by email: sales@stapleman.com

Downloadable White Paper: TIC Application Supplement | 88kb .pdf